Neem direct contact met ons op voor advies op maat!
Ga naar verlanglijst Verlanglijst

Winkelwagen

Je winkelwagen is momenteel leeg

Product image slideshow Items

  • ID-AL MicroPlayer mkIII
  • ID-AL MicroPlayer mkIII
  • ID-AL MicroPlayer mkIII

ID-AL MicroPlayer mkIII

€330,00

* Stukprijs: €0,00 / Excl. btw

Amplified (Spk+HP) audio player - SD/USB - GPIO 4in/2out - RS-232 - 6W PSU (amplifier not used)

Op voorraad

A multi purpose player for your audio project

Flagship of the ID-AL range, theMicroPlayer mkIII is a professional audio solution designed to fulfill to a wide scope of playback scenarios.
On switching on the player, the playback is performed precisely and offers among others a loop playback.

Backed on the interactivity skills of the MicroPlayermkIII , the playback can be controlled with motion sensor, push buttons or an RS-232 link. Its 2 outs are able to control leds, relays or machinery.

Its energy saving mode allows an outdoor installation with solar panels or batteries.

Its built-in amplifier and headphone out ease your installations. With a small size and without any risk of heat, the MicroPlayer mkIII can be installed in a storage array or directly within your productions.

A reliable technology

An inventive content struture system shapes the playback thanks to the use of a simple file manager in order to name the files and folders . Many options are available for your applications from the more simple to the more complex.

Designed and manufactured in France, the MicroPlayermkIII benefits from a 3 years warranty.

2 versions of MicroPlayer mkIII:

  • SON0396 - MicroPlayer mkIII with a 12 V - 6 W power supply (PSU) to use the line audio output only but not the internal amplifier for speakers.
  • SON0397 - MicroPlayer mkIII with a 12 V - 45W power supply (PSU) to use the internal amplifier with speakers.

Interfacing and Connectivity

  • Status LED
  • Infrared sensor - Protocol: Sony SIRC, 12bits, 38kHz carrier
  • SD card slot
  • USB Host 2.0 Full Speed (12 Mb/s), standard "mass storage" driver, type-A receptacle
  • 2 configurable buttons
  • Volume knob for the amplified speaker output
  • Unbalanced line-level stereo audio output on standard RCA connectors
  • Headphone stereo audio output on a standard 3.5mm (TRS) jack
  • Class D amplified speaker stereo audio output on 3.81mm pluggable terminal blocks
  • 4 combined configurable opto-isolated input contacts on 3.81mm pluggable terminal block (typical debounce time: 25ms)
  • 2 MOSFET outputs (500mA per output, max 20V) on 3.81mm pluggable terminal block
  • RS-232 serial link on a 3.81mm pluggable terminal block (9600, 19200, or 38400 bauds)
  • 2 power supply outputs dispatched on the pluggable terminal blocks
  • External DC power supply chassis socket - Plug 2.1mm / 5.5mm

Audio File Formats Supported

  • MP3 (.mp3): MPEG-1/2 Audio Layer III, mono/stereo, 16 bits, 44.1 kHz, from 32 kbit/s to 320 kbit/s, CBR (Constant Bit Rate) or VBR (Variable Bit Rate), with or without ID3v1/2 tags¹
  • Proprietary obfuscated MP3 (.mp3): to protect MP3 audio content²
  • WAV (.wav): mono/stereo, 16-bit LPCM, 44.1kHz, WAVE_FORMAT_PCM or WAVE_FORMAT_EXTENSIBLE

¹ Some ID3v1 or ID3v2.4 footer tags might cause unexpected noises at the end of the files.
² Contact Waves System for further information about this feature.

Other File Formats Supported

  • TXT (.txt): text file for serial (serial.txt) and configuration (config.txt) usages - raw text format (only printable 7-bit ASCII characters) with CR/LF, LF or CR end of line characters.

Storage Devices

  • File system supported: FAT32 (read/write)
  • Supports long filenames limited to 63 characters maximum including extension
  • Accepted storage device types:
    • SDSC cards
    • SDHC cards
    • USB flash drives
  • Accepts 1000 folders maximum at the root, containing up to 999 files each

Audio Amplifiers

  • Headphone output:
    • 2x85mW - 32Ohm, THD+N=0.1%, 1kHz
    • 2x110mW - 32Ohm, THD+N=10%, 1kHz
    • 2x200mW - 8Ohm, THD+N=0.1%, 1kHz
    • 2x325mW - 8Ohm, THD+N=10%, 1kHz
  • Speaker output:
    • 2x8W - 8 Ohm, THD+N=1%, 1kHz
    • 2x10W - 8 Ohm, THD+N=10%, 1kHz
    • 2x15W - 4 Ohm, THD+N=1%, 1kHz
    • 2x19W - 4 Ohm, THD+N=10%, 1kHz

Power Supply

  • Player power supply input:
    • Nominal voltage: 12V DC
  • Supplied mains adapter input:
    • Voltage: from 100V to 240V
    • Frequency: from 50Hz to 60Hz
  • The player is protected against polarity reversal.

Current Consumption (12V supplied)

  • Typical consumption in playback with a SD card, without amplifier: 100mA
  • Recommended power supply for full use of the device - output current: 3.45A
  • Standby mode: less than 15mA

Thermal Information

  • Operating ambient temperature: from 0 to +60 gradenC
  • Storage temperature: from -20 to +60 gradenC

Dimensions

  • Width: 140mm - 1/3 of a 19-inch rack
  • Height: 43mm - 1U
  • Depth (with the pluggable terminal blocks): 107mm

Weight

  • 240g (with the pluggable terminal blocks)
Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergen Meer over cookies »